Metal Fabrication Prices Nottingham | Gates, Railings & Welding Costs | Nottingham Metalworks
Nottingham Metalworks — Pricing Guide Metal Fabrication Prices
in Nottingham
All prices below are guide prices only. Every project is individually quoted based on dimensions, design complexity, materials, finishes and installation requirements. Contact us for a free site visit and accurate quotation. Gates Side gates, driveway gates and automated systems — fabricated to measure in our Nottingham workshop.
Side / Pedestrian Gate From £800 per gate, supply and install Single pedestrian or side access gate. Price varies with width, design complexity, material and finish. Wider openings or decorative detailing will increase cost.
Driveway Gate From £1,700 per pair, supply and install Double driveway gates — flat bar, box section, composite infill or timber infill. Price increases with opening width, automation prep and decorative work.
Automated Gates Price on application site survey required Gate automation costs vary by gate weight, drive type, access control and power supply. Contact us to arrange a free site visit and quotation.
Railings Bespoke steel and wrought iron railings for residential and commercial properties.
Bespoke Railings From £180 per metre, supply and install Fabricated to your exact specification. Price per metre is affected by railing height, infill pattern, post design and finish — powder coat, primer and paint, or hot dip galvanised.
Handrails Interior and exterior handrails for domestic staircases, steps and commercial premises.
Domestic Handrail From £150 per metre, supply and install Straight runs on stairs or steps. Price varies with profile, fixing method, number of bends or returns, and finish. Glass infill or decorative balusters are priced separately.
Commercial Handrail Price on application site survey required Commercial handrail systems must comply with Building Regulations Part K. We carry out site surveys to ensure compliance and provide an accurate fixed-price quotation.
Balustrades Steel balustrade systems for staircases, mezzanines, terraces and commercial interiors.
Steel Balustrade From £150 per metre, supply and install Post and infill balustrade in mild steel or stainless. Price increases with glass infill panels, cable systems or bespoke post designs. Commercial projects quoted individually.
Juliet Balconies Bespoke Juliet balconies fabricated for French doors and floor-to-ceiling glazing.
Bespoke Juliet Balcony From £600 supply and install Standard width Juliet balcony in mild steel, primed and painted. Price increases with wider openings, stainless steel, powder coating or architectural detailing. Every unit measured and fabricated to order.
Mobile Welding On-site MIG, TIG and MMA welding across Nottingham and the East Midlands.
Minimum Call-Out £300 up to 4 hours on site Covers travel, equipment and up to four hours of welding time. Suitable for smaller repair jobs, car welding, MOT repairs and short fabrication tasks.
Full Day On Site £550 full day rate Full day mobile welding — suited to larger on-site fabrication, structural welding or projects requiring extended time. Materials charged separately where applicable.
Workshop Fabrication Bespoke fabrication carried out in our Nottingham workshop — sheet metal, precision parts, structural elements and more.
Minimum Workshop Job From £120 minimum charge Minimum charge applies to small workshop jobs — cutting, drilling, welding or forming. Larger projects are quoted individually based on time, materials and complexity.
What affects the final price?
  • Overall dimensions and opening size
  • Design complexity and decorative detailing
  • Material specification — mild steel, stainless or wrought iron
  • Finish — primer and paint, powder coat or hot dip galvanised
  • Infill type — flat bar, box section, composite panels or timber
  • Access and installation conditions on site
  • Quantity — multiple units on the same project reduce unit cost
  • Travel distance outside Nottingham

All prices shown are guide prices only and are intended to help you understand the likely range of costs before we visit. Every project is individually measured and quoted — the final price will reflect your exact dimensions, chosen design, materials and finish. There are no hidden charges. Your quotation will be itemised and agreed before any work begins.

Ready for a free quote? Get in touch to arrange a free site visit. We'll measure up, discuss your options and provide a written quote with no obligation — usually within 48 hours of visiting.
Call 0115 647 6611 Get a free quote

Frequently Asked Questions about Metal Fabrication Pricing in Nottingham

  • Do you charge for quotes and site visits?

    No — site visits and quotations are completely free. If you have provided good photos or videos James will use that to provide you with a provisional quote to ensure you have a realistic expectation of cost prior to visiting. If the provisional quote is acceptable James will visit your property, take accurate measurements and discuss your options before providing a written quote. There is no obligation to proceed.

  • Why do prices vary so much for the same product?

    Everything we make is bespoke. A driveway gate for a 3-metre opening in flat bar with a primer and paint finish will cost significantly less than a 5-metre set of bi-fold gates with composite infill panels and automated openers. The guide prices on this page reflect the simplest version of each product — the site visit is where we establish what your project actually requires.

  • Are materials included in your prices?

    Yes — for all supply and install work, materials are included in the quoted price. For mobile welding call-outs, any additional materials required on site (such as welding rod, wire or gas) are charged at cost if not already included in the agreed scope.

  • Do I need planning permission for gates or railings?

    In most cases, no. Gates and railings under 1 metre in height adjacent to a highway, or under 2 metres elsewhere on your property, typically fall within permitted development rights and do not require planning permission. However, if your property is in a conservation area or is listed, different rules apply and permitted development rights may be restricted. We will flag anything worth checking during the site visit, but always recommend confirming with your local planning authority if you are in any doubt.

  • How long does fabrication take?

    Lead times vary with current workload and project complexity. Smaller jobs such as a single gate or a short railing run are typically ready within two to three weeks of order confirmation. Larger or more complex projects may take longer — we will give you an honest estimate at the quotation stage and keep you updated throughout.

  • What payment methods do you accept?

    We accept bank transfer (BACS) and debit or credit card. For larger projects a deposit is required on order confirmation, with the balance due on completion. Full payment terms are outlined in your quotation before any work begins.

  • Do you cover areas outside Nottingham?

    Yes — we cover the wider Nottinghamshire area as standard, including Beeston, West Bridgford, Carlton, Arnold, Hucknall and Long Eaton. We also take on projects further afield across the East Midlands. Mobile welding call-outs outside our standard area may incur a travel supplement — contact us to confirm coverage for your location.